Wind And Solar Hybrid Controller 600W 24V Intelligent Solar Charge Controller
Description:
The wind and solar hybrid controller has been condensed for many years of application experience (such as waterproof, dustproof, salt spray, operational wiring error, fan wind limit control, energy management, etc.), regardless of the application to charge control, or street light control, each performance is excellent. In order to cooperate with various applications, the controller adopts layering and building block structure. All functions can be combined with different function boards according to the actual application, which is convenient for quick customization and suitable for application.
Design Features:
RS232 Communication
Standard RS232 communication, easy to monitor with computer software. (RS485, short-range wireless optional), using USB to RS232 components, more convenient to do data communication with the computer (computer with USB interface can be used).
Battery reversal will automatically alert you
The battery input end will not be damaged continuously, and there will be a buzzer warning. It avoids damage to the equipment due to wiring errors, fires, and better protects the battery.
Continuous short-circuit output protection
The discharge output has continuous short-circuit output protection and over-current protection. Recover yourself after abnormal exclusion. It avoids damage to the equipment due to malfunction of the electrical equipment (especially short circuit) or causes fire.
Wind stall current limiting power generation control technology
The fan stall limiting current control method can prevent the fan from running under overcurrent and protect the expensive generator from being damaged by the heat generated by the overcurrent.
Support for multiple output mode selections
The controller offers a variety of output modes (light control, time control, morning light, PWM dimming, reverse) for easy application.
The controller wiring terminal is placed with the warning function facing up
When the controller terminal is placed up, it will be alerted to allow the customer to use it in the correct installation direction, avoiding the use in the open air, or due to weather, the surface of the wire is dew, and the rain directly along the wire, the water is introduced into the controller. The possibility of damaging the controller after a large amount of water has accumulated.
Product Details:
| Battery parameters |
| Applicable battery voltage | 24V |
| Battery protection method | Reverse protection (do not burn any parts, have voice prompts); Overvoltage protection, undervoltage protection (for streetlight loads) |
| Overvoltage protection point voltage | 29.0V±0.2V |
| Overvoltage recovery point voltage | 27.5V±0.2V |
| Undervoltage protection point voltage | 21.0V±0.2V |
| Undervoltage recovery point voltage | 23.0V±0.2V |
| Battery temperature compensation | 5mv/°C/2V (available) (optional) |
| Wind turbine input port parameters |
| Applicable wind turbine rated power | 600W |
| Port rated current | 30A dc (after rectification) |
| Port maximum input current | 40A dc (after rectification) |
| Wind turbine speed limit power generation preset speed | 600 Rpm (can be set) |
| Wind turbine current limiting power generation preset current | 30A (can be set) |
| Wind turbine protection method | Overspeed protection, overcurrent protection, inductive lightning protection |
| Unloading method | PWM stepless high frequency soft unloading (built-in) |
| MPPT function | Boost MPPT mode (automatic tracking or 5-band curve tracking) |
| MPPT channel input current | 18A |
| PV input port parameters |
| Applicable PV rated power | 270W~550W (standard) |
| Port rated input current | 15A (standard) |
| Charging voltage drop | <0.2V |
| Photovoltaic Protection Method | Reverse protection (voice reminder) |
| Unloading method | Open unloading |
| Discharge output port parameters |
| Outputs | 2-way standard output/PWM mode is 1-channel dimming output |
| Every output current | 12A |
| Output protection method | Overcurrent protection (15A/30 seconds 18A/0.4 seconds), short circuit protection (current > 150A) |
| Output control method | Light control, time control, hold output, reverse output, PWM output (250HZ only on the 2nd road) |
| Other |
| Accessibility | Controller internal air temperature monitoring, unloading component temperature monitoring, fan MPPT Component temperature monitoring, controller terminal upside down installation inversion monitoring (voice reminder) |
| Display mode | Liquid (LCD) display |
| Communication method | RS232 (5V level), RS485 (standard) / short-range wireless RF (optional) |
| Parameters that can be displayed | Fan input voltage / current / power / power generation / speed / unloading current PV input voltage / current / power / power generation Battery voltage / charging current / power / total charge / battery status information 2 output ports output current / power / abnormal information |
| Standby power consumption (screen backlight off) | About 20ma / (12 ~ 24) V system |
| How to operate | 3M foil button operation (4 buttons) |
| Working temperature and humidity range (environment) | -40~+80°C/20~85%RH (but no condensation) |
| Protection level | IP41 |
| Controller size (length * width * height *) | 175mm*148mm*84mm |
| Net weight | 1.8KG |
Application:
Product Tags:
|
|
24V Hybrid Mppt Solar Charge Controller 600W 2 Years Warranty 1.8kg Weight Images
|
